智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
1、 概述 General
1.1 VS1-24型戶內高壓真空斷路器（下稱斷路器）是戶內安裝、三相交流50HZ，額定電壓為24KV的變配電的控制和保護設備。用于24KV及以下的交流系統中，可用來分、額定電流和故障電流，尤其適合頻繁操作，如投、切電容器組合，控制電爐、變壓器和高壓電機等，也可作為聯絡斷路器使用。
The VS1-24 indoor high voltage vacuum circuit breaker (hereafter refered to as circuit breaker) which has 3-phases、AC50Hzrated voltage of 24KV is a kind of indoor controllingprotecting equipment for transmittingdistributing .It is used in the A.C system of 24KVbelow openingclosing the rated currentfault current. It is especially suitable for operating frequently, for example closingopening capacitor bank、controlling furnace transformerhigh voltage motor etc.,it also can be used as the connecting circuit breaker.
1.2 斷路器符合GB1984和IEC62271的標準。
The circuit breaker should comply with the standard of GB1984IEC62271.
2、 技術參數 Technical parameters
2.1 主要技術參數 Main technical parameters
| 序號 Sr. No. | 項目 Item | 單位 Unit | 參數 Parament | ||||
| 1 | 額定電壓 Rated voltage | KV | 24 | ||||
| 2 | 額定絕緣水平 Rated insulation level | 一分鐘工頻耐受電壓（有效值） 1min power-frequency withstand voltage(r. m. s) | 65 | ||||
| 雷電沖擊耐受電壓（峰值） Lightning impulse withstand voltage(peak) | 125 | ||||||
| 3 | 額定頻率 Rated frequency | A | 630,1250,1600,2000,2500 | ||||
| 4 | 額定電流 Rated current | 31.5 | |||||
| 5 | 額定開合電纜充電電流 Rated breaking current for charging cable | HZ | 50,60 | ||||
| 6 | 額定短路開斷電流 Rated short-circuit breaking current | KA | 20 | 25 | 31.5 | ||
| 7 | 額定短路關合電流（峰值） Rated short-circuit making current(peak) | 50 | 63 | 80 | |||
| 8 | 額定峰值耐受電流 Rated peak withstand current | 50 | 63 | 80 | |||
| 9 | 額定短時耐受電流（有效值） Rated short-time withstand current(r. m. s) | 20 | 25 | 31.5 | |||
| 10 | 額定短路耐受時間 Rated duration of short-circuit | S | 4 | ||||
| 11 | 全開斷時間 Total breaking time | MS | ≤80 | ||||
| 12 | 額定操作順序Rated operating sequency | S | O-0.3s-CO-180s-CO O-180s-CO-180s-CO | ||||
| 13 | 機械壽命 Mechanism endurance | 次 Times | 10000(M2class) | ||||
| 14 | 電壽命Electrical endurance | 額定短路開斷電流 Rated short-circuit breaking current | 50 | ||||
| 開斷額定電流breaking rated current | 2000 | ||||||
| 15 | 動、靜觸頭累計允許磨損厚度 Total allowable nearing thickness of movingfixed contacts | MM | 3 | ||||
| | | | | | | | |
2.2 裝配調整后機械性參數
After adjustedinstalled, the mechanism character parametes comply
| 序號 Sr.No. | 項目 Item | 單位 Unit | 參數 Parament | |
| 1 | 觸頭開柜 Contact clearance | MM | 14±1 | |
| 2 | 觸頭超程 Supper travel of contact | 3.5±1 | ||
| 3 | 平均合閘速度 Average closing speed | M/S | 1.0±0.2 | |
| 4 | 平均分閘速度 Average opening speed | 1.3±0.2 | ||
| 5 | 合閘時間 Closing time | MS | 35~70 | |
| 6 | 分閘時間 Opening time | 20~50 | ||
| 7 | 觸頭合閘彈跳時間 Bouncing time of closing contact | ≤2 | ||
| 8 | 三相分閘不同期性 3-phase opening synch ronism differenct | ≤2 | ||
| 9 | 相間中心距 Phases center distance | MM | 210±0.5 | 275±0.5 |
| 10 | 觸頭合閘接觸壓力 Contacting pressure of closing contact | N | 2400±200(20KA、25KA) 310014±200(31.5KA) | |
2.3 彈簧操動機構技術參數
Technical parameters of spring operating mechanism
| 序號 Sr. No | 項目 Item | 單位 Unit | 參數 Parament |
| 1 | 額定操作電壓 Rated operation | V | AC220、110 DC220、110 |
| 2 | 工作電流 Working current | A | AC、DC220：1.1 AC、DC110：3.3 |
| 3 | 儲能電機功率 Energy storage motor power | W | 80、100 |
| 4 | 儲能電機額定電壓 Rated voltage of energy storage motor | V | AC220、110 DC220、110 |
| 5 | 電動機儲能時間 Storage time of motor | S | ≤10 |
