YJ-2001型
勻加荷壓力試驗機一Uniform Loading Pressure Testing Machine
產品概要YJ-2001型勻加荷壓力試驗機是嚴格遵照《美國石油學會API規范10》與《GB10238-88油井水泥》要求研制。由國家水泥質量監督檢驗中心監制。 INTRODUCTION---YJ-2001 Uniform Loading Pressure Testing Machine is designed to determine the compressive strength of a well cement in strict compliance with API Specification 10 and National Standards GB10238 -2005.Produced by the national quality supervision and inspection center in supervision.
主要技術特點
1、該機采用新數字控制技術,全自動控制、數字顯示、勻速加荷、加荷速率可調。
2、采用進口HBM傳感器進行壓力測量,配合專用模塊,采集精度更高。
3、試驗機采用全閉環測量方式,控制精度高。
4、試驗機采用模塊化結構,對環境適應性強,工作穩定可靠,方便維修。
5、觸摸式彩色液晶顯示,所有操作集中顯示在10.1寸顯示屏上,全中文顯示,操作簡便易懂。
6、RS232接口,可與PC進行串口通訊,提供PC數據采集軟件。
7、無需三相電源,采用單相電源供電。
主要技術參數:
1、壓力范圍:0-200KN。
2、加荷速率范圍:0.1-10KN/S間可調。
3、小加荷起始點:<1.8KN.
4、測量誤差:<±1%(視值誤差)。
5、電源電壓:單相220V±10% AC50HZ
6、噪音:<55dB
7、環境溫度:15-35℃
8、電源功率:1KW
9、體積:96×55×137 cm
注:該機內置油井1(17.9KN/min)油井2(71.7KN/min)及ISO(2.4KN/S)三個常用試驗方案,更加方便油井水泥及建筑水泥強度試驗。
SPECIFICATIONS
1. Pressure range: 0-200KN
2. Loading rate : 0.1-10kN/s
3. Min loading point : <1.8kN
4. Measurement accuracy: <±1%
5. Power: AC 220V(±10%) 50Hz 1 kW
6. Noise: <55dB
7. Ambient temperature: 15-35℃
8.Volume :96×55×137cm
The inside of the machine settings well 1 (17.9kN/min) well 2 (2.4kN/min) and ISO(2.4kN/s) , more convenient to well cement and construction cement for strength testing.