PSP105氣相色譜儀
PSP105型氣相色譜儀主要用于汽油中醇類、醚類等含氧化合物及苯的分析，其流程設計滿足GB17930-2006《車用汽油》；GB 18351-2004《車用乙醇汽油》；SH/T0663《汽油中某些醇類和醚類含氧化合物的測定》；SH/T0693《汽油中芳烴的測定》中的規定。儀器可選配多種檢測器及填充柱、分流/不分流毛細管柱進樣系統
詳細介紹
PSP105型氣相色譜儀?
無鉛汽油是為了改善汽車排放物中含鉛物對環境的污染。而在汽油中加入醚類和醇類和其他含氧化合物可以提高辛烷值及降低揮發性。所加含氧化合物的類型和濃度都有規定，并應加以調整，以便保證達到商品汽油的質量要求。驅動性、蒸氣壓、相分離，汽車尾氣排放和揮發性汽車排放物都與燃料的含氧化合物有一定的關系。另外，苯和芳烴的含量對于汽油質量也非常重要。 國家規定可在汽油中添加10％的變性燃料乙醇，并監測其他醇類和醚類，以達到節能降耗的目的。目前，車用乙醇汽油已經在全國多個省市推廣應用，所以乙醇汽油的分析檢測也越來越重要。
PSP105型氣相色譜儀主要用于汽油中醇類、醚類等含氧化合物及苯的分析，其流程設計滿足GB17930-2006《車用汽油》；GB 18351-2004《車用乙醇汽油》；SH/T0663《汽油中某些醇類和醚類含氧化合物的測定》；SH/T0693《汽油中芳烴的測定》中的規定。儀器可選配多種檢測器及填充柱、分流/不分流毛細管柱進樣系統；全兼容安捷倫6890N氣相色譜儀檢測器及相關檢測器控制板、色譜工作站和自動進樣器。性?xún)r(jià)比，性能優良，運行穩定可靠。
技術指標
1.柱溫箱：
爐膛尺寸： 28×30×18cm
溫度范圍室溫：5~450℃
溫度設定1℃；程序設定升溫速率0.1℃
升溫速度：120℃/ min
溫度穩定性：當環境溫度變化1℃時，為0.01℃
程序升溫：7階程序升溫
可運行柱流失補償（雙通道）
2.進樣口：
多種進樣口可配：填充柱進樣口，分流/不分流毛細管進樣口，程序升溫冷柱頭進樣口。
3.氫火焰離子化檢測器（FID）：
使用溫度：400℃
檢測限：≤5×10-12g/s [n-C16]
漂移：≤5×10-13A/30min
噪音：≤2×10-13A
動態線性范圍：≥107
4.熱導池檢測器（TCD）：
使用溫度：400℃
靈敏度：≥10000mv.ml/mg [n-C16]
漂移：≤100μV/30min
噪音：≤2×10-13A
動態線性范圍：≥104
5.火焰光度檢測器（FPD）：
使用溫度：250℃
檢測限：≤2x10-13 gs(P),≤5x10-11g/s（S）
動態線性范圍：≥103（P），≥102（S）
噪音：≤2×10-12A
漂移：≤4x10-11A/30min
6.電子捕獲檢測器（ECD）：
使用溫度：350℃
檢測限：≤1x10-14g/ml(y-666)
動態線性范圍：≥104
噪音：≤20μA
漂移：≤50μV/30min
7.氮磷檢測器（NPD）：
使用溫度：400℃
檢測限：≤5x10-13 gs(P),≤1x10-12g/s（N）
動態線性范圍：≥103（P），≥103（N）
噪音：≤4×10-13A
漂移：≤2.5x10-12A/30min
8.光電離子化檢測器（PDHID）：
檢測限：≤5ppb
性能特點
儀器采用分流/不分流毛細進樣口(EPC 自動電子壓力控制)，有效提高氣體流量的穩定性，可以得到更好的定量重復性。
全新集成數字電子電路，控制精度高，性能穩定可靠，可達0.01℃的溫控精度。
具有開機自診斷功能、秒表功能（方便流量穩定）、運轉定時器功能、停電儲存保護功能、鍵盤鎖定功能、抗電源突變干擾功能、網絡化數據通訊及遠程控制功能。
19位進口全自動進樣系統設計，可得更低檢測限。分流/不分流毛細進樣口(EPC 自動電子壓力控制)
可選配自動/手動氣體六通進樣閥進樣器、頂空進樣器、熱解析進樣器、裂解爐進樣器、甲烷轉化爐、自動進樣器。
程序升溫、爐膛溫度精密控制穩定平衡更快捷。
可安裝FID、TCD、FPD、NFD、PDHID六種檢測器，各種檢測器均可獨立控溫，氫火焰檢測器容易拆卸和安裝，便于清潔或換噴嘴。熱導池檢測器（TCD）穩定時間≤20min。
具有自動在線檢測功能。
PSP105 gas chromatograph
PSP105 gas chromatograph is mainly used for the analysis of alcohols, ethers and other oxygen-containing compounds and benzene in gasoline. Its process design fully meets GB17930-2006 "Vehicle gasoline"; GB 18351-2004 "Vehicle ethanol gasoline"; SH / T0663 "Determination of certain alcohols and ethers oxygenates in gasoline"; SH / T0693 "Determination of aromatics in gasoline". The instrument can be equipped with a variety of detectors and packed columns, split / splitless capillary column sampling system
Detailed introduction
PSP105 Gas Chromatograph
Unleaded gasoline is designed to improve environmental pollution caused by lead in vehicle emissions. Adding ethers and alcohols and other oxygenates to gasoline can increase octane number and reduce volatility. The type and concentration of the oxygenated compounds added are regulated and should be adjusted to ensure that the quality requirements of commercial gasoline are met. Driveability, vapor pressure, phase separation, vehicle exhaust emissions and volatile vehicle emissions all have a certain relationship with the oxygenates of the fuel. In addition, the content of benzene and aromatics is also very important for gasoline quality. The state stipulates that 10% of denatured fuel ethanol can be added to gasoline, and other alcohols and ethers can be monitored to achieve the purpose of energy conservation and consumption reduction. At present, ethanol gasoline for vehicles has been popularized in many provinces and cities across the country, so the analysis and detection of ethanol gasoline is becoming more and more important.
PSP105 gas chromatograph is mainly used for the analysis of alcohols, ethers and other oxygen-containing compounds and benzene in gasoline. Its process design fully meets GB17930-2006 "Vehicle gasoline"; GB 18351-2004 "Vehicle ethanol gasoline"; SH / T0663 "Determination of certain alcohols and ethers oxygenates in gasoline"; SH / T0693 "Determination of aromatics in gasoline". The instrument can be equipped with a variety of detectors and packed columns, split / splitless capillary column sampling systems; fully compatible with the Agilent 6890N gas chromatograph detector and related detector control boards, chromatography workstations and autosamplers. Excellent cost performance, excellent performance, stable and reliable operation.
Technical index
1. Column thermostat:
Hearth size: 28 × 30 × 18cm
Temperature range room temperature: 5 ~ 450 ℃
The temperature is set at 1 ℃; the program is set at a heating rate of 0.1 ℃
Maximum heating rate: 120 ℃ / min
Temperature stability: 0.01 ℃ when the ambient temperature changes by 1 ℃
Program heating: 7 steps program heating
Runnable column bleed compensation (dual channel)
2. Inlet:
A variety of inlets are available: packed column inlets, split / splitless capillary inlets, and programmed cold column inlets.
3. Hydrogen flame ionization detector (FID):
Maximum operating temperature: 400 ° C
Detection limit: ≤5 × 10-12g / s [n-C16]
Drift: ≤5 × 10-13A / 30min
Noise: ≤2 × 10-13A
Dynamic linear range: ≥107
4. Thermal Conductivity Cell Detector (TCD):
Maximum operating temperature: 400 ° C
Sensitivity: ≥10000mv.ml / mg [n-C16]
Drift: ≤100μV / 30min
Noise: ≤2 × 10-13A
Dynamic linear range: ≥104
5. Flame photometric detector (FPD):
Maximum use temperature: 250 ℃
Detection limit: ≤2x10-13 gs (P), ≤5x10-11g / s (S)
Dynamic linear range: ≥103 (P), ≥102 (S)
Noise: ≤2 × 10-12A
Drift: ≤4x10-11A / 30min
6. Electronic Capture Detector (ECD):
Maximum use temperature: 350 ℃
Detection limit: ≤1x10-14g / ml (y-666)
Dynamic linear range: ≥104
Noise: ≤20μA
Drift: ≤50μV / 30min
7. Nitrogen and phosphorus detector (NPD):
Maximum operating temperature: 400 ° C
Detection limit: ≤5x10-13 gs (P), ≤1x10-12g / s (N)
Dynamic linear range: ≥103 (P), ≥103 (N)
Noise: ≤4 × 10-13A
Drift: ≤2.5x10-12A / 30min
8. Photoelectric Ionization Detector (PDHID):
Detection limit: ≤5ppb
Performance characteristics
The instrument uses a split / splitless capillary inlet (EPC automatic electronic pressure control), which effectively improves the stability of gas flow and can obtain better quantitative repeatability.
New integrated digital electronic circuit, high control accuracy, stable and reliable performance, temperature control accuracy of 0.01 ℃.
With power-on self-diagnosis function, stopwatch function (convenient flow stability), running timer function, power failure storage protection function, keyboard lock function, anti-interruption power supply function, networked data communication and remote control function.
The unique design of the 19-bit imported automatic sampling system can achieve lower detection limits. Split / splitless capillary inlet (EPC automatic electronic pressure control)
Optional automatic / manual gas six-way valve injector, headspace sampler, thermal analysis sampler, cracking furnace sampler, methane conversion furnace, and automatic sampler.
Programmable heating, precise control of furnace temperature and stable balance are faster.
Six detectors of FID, TCD, FPD, NFD, and PDHID can be installed. Each detector can independently control the temperature. The hydrogen flame detector is easy to remove and install, and it is easy to clean or change the nozzle. Thermal Conductivity Cell Detector (TCD) stabilization time ≤20min.
With automatic online detection function.