PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
中山市泰倫特電子科技有限公司
中山市泰倫特電子科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地中山市
聯系方式：周秋香查看聯系方式
更新時間：2024-11-03 08:28:14瀏覽次數：47次
聯系我時，請告知來自 智能制造網暫無信息 |
TheModelSCON-300isDINsize,4digitDCpanelmeterwithisolatedanalogoutputand4Alarmoutputs
The Model SCON - 300 is DIN size, 4 digit DC panel meter with isolated analog output and 4 Alarm outputs.
Automatic calculation Display range , ZERO & SPAN of input.
ORDERING INFORMATION
Specify code number and variables
@ Code number : SCON - Model - Input, Output, Power (e.g. SCON- 300 - RNX)
@ Special input, outputs range : CODE, Display range, Input range (e.g. SCON -300 - DNX, 0-9999, 4-20 mA)
http://www.sinwooscon.co.kr
INDICATOR
GENERAL SPECIFICATIONS
PERFORMANCE
Accuracy : 0.1 % of FS
Temp. coefficient : 0.01% of FS + 0.1 digit / C
Insulation resistance : 100Mohm or more with 500VDC
Dielectric strength : AC 1500V at 1 Minute (input to power)
Construction : panel flush mounting
Connection : screw terminals
Housing material : Plastic(resin) light-gray
Input configuration : Differential Input
Scaling : Functional switches at the front panel
DISPLAY
LED : 0.6 inch or 1 inch 7-segment, red or green
Number of display digits : 4 (-9999 ~ 9999)
Decimal point position : 3 positions selected by a programmed functional switches at the front panel
Set-point adjustments : front-accessed programmed functional switches
Hysteresis (dead-band) : 0.1 ~ 2.0 % of FS by programmed functional switches
Over-range indication : display "OVEr"
Engineering unit indication : sticker attached
Burn Out : Selectable Up-Scale or Down-Scale
INSTALLATIONS
Power supply : AC 110V / 220V 60Hz
DC 24V 10%, 5VA
Operating temperature : 0 to 55 C (32 to 131 F)
Operating humidity : 20 - 80% RH(non-condensing)
Mounting : panel flush mounting
Size : W96 x H48 x D118 mm (3.78" x 1.89" x 4.65")
INPUT & OUTPUTS
INPUT
DC voltage : 0 ~ 300VDC minimum span : 10mV
DC current : resister incorporated
PAC & RTD
DC voltage
Input Impedance
DC current
Input Resistance
0 - 10 mV
0 - 100 mV
0 - 10 V
> 12 V
10 KOhm or more
100 KOhm or more
1 MOhm or more
2.5 KOhm / V
4 - 20 mA
10 - 50 mA
0 - 1 mA
250 Ohm
100 Ohm
1000 Ohm
PMC Input :100~100Kohm RTD Input:: -200~+600'C
S-CON200 : Indicator(DC,
RTD,Other -> Alarm,Analog)
Indicator
The Model SCON - 200 is DIN size, 4 digit DC panel meter with isolated analog output and 4 Alarm outputs. Automatic calculation Display range , ZERO & SPAN of input.
MODEL
S-CON200-(in)(out)(power)
-(input)
D : DC Signal input (mV, V, mA)
I : Current loop supply (isolated)
R : RTD (Pt 100ohm) Input
T : Thermocouple Input
P : Potentiometer Input
O : Other Spec. Input
(output)
1 : Alarm output 2 (High & Low)
2 : Alarm output 4 (H.High, High, Low, L.Low)
3 : Analog output with 2 Alarms (SPDT)
4 : Analog output with 4 Alarms (SPST)
5 : Analog Output only
N : No output
(power)
X : AC 110V / 220V, 50/60YHz
Y : DC 24V
S-CON100 : Indicator
(DC,RTD,Other -> Display)
S-CON 300 : Indicator
(DC Output)
Indicator
The Model S-CON 300 is DIN size, 4 digits DC panel meter with isolated analog output, Automatic calculation of display range, ZERO & SPAN of input.
MODEL
S-CON300 -(in)(out)(power)
-(input)
D : DC Signal input(mV,V,mA)
I : Current looped supply (Isolated)
R : RTD(Pt100 Ohm) Input
P : Potentiometer Input
O : Other Spec. Input
(output)
5 : No Alarm, Analog output
(power)
X : AC 110V/220V 50/60Hz 10%
Y : DC 24V
Z : Other Specification
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
