寶德8232氯傳感器 德國burkert8232：

Bürkert 8232型電化學傳感器，用來測量無機水源中游離氯含量（氯氣，次氯酸鈉，…)8232型可提供三款： •帶有三電極的“微量”氯傳感器（零氯含量）適合在濃度非常低的情況下測量氯含量。對隔離膜采取防護措施，可防止形成生物膜，因此可以在不含氯的水中工作長達四個星期。傳感器在一個四電極插頭上提供一個電壓輸出。 •帶有三電極的氯傳感器顯著降低了對PH值得依賴程度。傳感器在M12插頭上提供一個電流輸出，適用于游泳池、飲用水或海水場合。液體中必須含有少量氯 （≥ 0.1 ppm）。 •帶有兩電極的氯傳感器在M12插頭上提供一個電流輸出，其適用在游泳池、飲用水或過程用水。被測液體不允許含有任何清潔劑（例如表面活性劑）或顆粒物質成分。PH值必須保持恒定。液體必須含有少量氯（≥ 0.1 ppm）。

• 帶有三電極的氯傳感器適用于低濃度測量
• 三電極氯傳感器大大降低了對PH的依賴程度
• 兩電極氯傳感器，用于PH值恒定情況下的標準應用

寶德8232氯傳感器 德國burkert8232：

B rkert 8232 type electrochemical sensor is used to measure the inorganic water free chlorine content (chlorine, sodium hypochlorite,... Type 8232 offers three: trace chlorine sensors with three electrodes (chlorine content) suitable for measuring chlorine content at very low concentrations. Protective measures are taken to prevent the formation of biofilms so that the membrane can be operated for four weeks in the absence of chlorine. The sensor provides a voltage output on a four electrode plug. • chlorine sensors with three electrodes significantly reduce the reliance on PH. The sensor provides a current output on the M12 plug, which is suitable for swimming pools, drinking water or sea water occasions. The liquid must contain a small amount of chlorine (PPM = 0.1). • a chlorine sensor with two electrodes provides a current output on the M12 plug, which is suitable for use in swimming pools, drinking water, or process water. The liquid is not allowed to contain any detergent (e.g., surfactant) or particulate matter component. PH must be constant. Must contain a small amount of liquid chlorine (PPM = 0.1).

Chlorine sensors with three electrodes are suitable for low concentration measurements
The three electrode chlorine sensor greatly reduces the dependence on PH
Two electrode chlorine sensor for standard application of pH constant

：本公司代理德國寶德全系列產品，擁有大量庫存現貨，詳細了解請。