General information

Product type designation

TM PosInput 1

Firmware version

V1.2

• ● FW update possible

Yes

usable BaseUnits

BU type A0

Product function

• ● I&M data

Yes; I&M0 to I&M3

Engineering with

• ● STEP 7 TIA Portal configurable/integrated as of version

V13 / V13

• ● STEP 7 configurable/integrated as of version

V5.5 SP3 / V5.5 SP4

• ● PROFIBUS as of GSD version/GSD revision

GSD Revision 5

• ● PROFINET as of GSD version/GSD revision

GSDML V2.3

Installation type/mounting

Rack mounting

Yes

Rail mounting

Yes

Supply voltage

Load voltage L+

• ● Rated value (DC)

24 V

• ● permissible range, lower limit (DC)

19.2 V

• ● permissible range, upper limit (DC)

28.8 V

• ● Reverse polarity protection

Yes

Input current

Current consumption, max.

75 mA; without load

Encoder supply

Number of outputs

1

24 V encoder supply

• ● 24 V

Yes; L+ (-0.8 V)

• ● Short-circuit protection

Yes; electronic/thermal

• ● Output current, max.

300 mA

Power loss

Power loss, typ.

1.9 W

Address area

Occupied address area

• ● Inputs

16 byte; 4 bytes in Fast mode

• ● Outputs

12 byte; 4 bytes for Motion Control, 0 bytes for Fast mode

Digital inputs

Number of digital inputs

2

Digital inputs, parameterizable

Yes

Input characteristic curve in accordance with IEC 61131, type 3

Yes

Digital input functions, parameterizable

• ● Gate start/stop

Yes; only for pulse and incremental encoders

• ● Capture

Yes

• ● Synchronization

Yes; only for pulse and incremental encoders

• ● Freely usable digital input

Yes

Input voltage

• ● Rated value (DC)

24 V

• ● for signal "0"

-30 to +5V

• ● for signal "1"

+11 to +30V

• ● permissible voltage at input, min.

-30 V

• ● permissible voltage at input, max.

30 V

Input current

• ● for signal "1", typ.

2.5 mA

Input delay (for rated value of input voltage)

for standard inputs

• — parameterizable

Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms

• — at "0" to "1", min.

6 µs; for parameterization "none"

• — at "1" to "0", min.

6 µs; for parameterization "none"

for counter/technological functions

• — parameterizable

Yes

Cable length

• ● shielded, max.

1 000 m

• ● unshielded, max.

600 m

Digital outputs

Type of digital output

Transistor

Number of digital outputs

2

Digital outputs, parameterizable

Yes

Short-circuit protection

Yes; electronic/thermal

• ● Response threshold, typ.

1 A

Limitation of inductive shutdown voltage to

L+ (-33 V)

Controlling a digital input

Yes

Digital output functions, parameterizable

• ● Switching tripped by comparison values

Yes

• ● Freely usable digital output

Yes

Switching capacity of the outputs

• ● with resistive load, max.

0.5 A; Per digital output

• ● on lamp load, max.

5 W

Load resistance range

• ● lower limit

48 ?

• ● upper limit

12 k?

Output voltage

• ● for signal "1", min.

23.2 V; L+ (-0.8 V)

Output current

• ● for signal "1" rated value

0.5 A; Per digital output

• ● for signal "1" permissible range, max.

0.6 A; Per digital output

• ● for signal "1" minimum load current

2 mA

• ● for signal "0" residual current, max.

0.5 mA

Output delay with resistive load

• ● "0" to "1", max.

50 µs

• ● "1" to "0", max.

50 µs

Switching frequency

• ● with resistive load, max.

10 kHz

• ● with inductive load, max.

0.5 Hz; Acc. to IEC 60947-5-1, DC-13; observe derating curve

• ● on lamp load, max.

10 Hz

Total current of the outputs

• ● Current per module, max.

1 A

Cable length

• ● shielded, max.

1 000 m

• ● unshielded, max.

600 m

Encoder signals, incremental encoder (symmetrical)

• ● Input voltage

RS 422

• ● Input frequency, max.

1 MHz

• ● Counting frequency, max.

4 MHz; with quadruple evaluation

• ● Cable length, shielded, max.

32 m; at 1 MHz

• ● Signal filter, parameterizable

Yes

• ● Incremental encoder with A/B tracks, 90° phase offset

Yes

• ● Incremental encoder with A/B tracks, 90° phase offset and zero track

Yes

• ● Pulse encoder

Yes

• ● Pulse encoder with direction

Yes

• ● Pulse encoder with one impulse signal per count direction

Yes

Encoder signals, incremental encoder (asymmetrical)

• ● Input voltage

5 V TTL (push-pull encoders only)

• ● Input frequency, max.

1 MHz

• ● Counting frequency, max.

4 MHz; with quadruple evaluation

• ● Signal filter, parameterizable

Yes

• ● Incremental encoder with A/B tracks, 90° phase offset

Yes

• ● Incremental encoder with A/B tracks, 90° phase offset and zero track

Yes

• ● Pulse encoder

Yes

• ● Pulse encoder with direction

Yes

• ● Pulse encoder with one impulse signal per count direction

Yes

Encoder signals, absolute encoder (SSI)

• ● Input signal

to RS-422

• ● egram length, parameterizable

10 ... 40 bit

• ● Clock frequency, max.

2 MHz; 125 kHz, 250 kHz, 500 kHz, 1 MHz, 1.5 MHz or 2 MHz

• ● Binary code

Yes

• ● Gray code

Yes

• ● Cable length, shielded, max.

320 m; Cable length, RS-422 SSI absolute encoders, Siemens type 6FX2001-5, 24 V supply: 125 kHz, 320 meters shielded, max.; 250 kHz, 160 meters shielded, max.; 500 kHz, 60 meters shielded, max.; 1 MHz, 20 meters shielded, max. 1.5 MHz, 10 meters shielded, max.; 2 MHz, 8 meters shielded, max.

• ● Parity bit, parameterizable

Yes

• ● Monoflop time

16, 32, 48, 64 µs & automatic

• ● Multiturn

Yes

• ● Singleturn

Yes

Interface types

• ● RS 422

Yes

• ● TTL 5 V

Yes; push-pull encoders only

Isochronous mode

Isochronous operation (application synchronized up to terminal)

Yes

Interrupts/diagnostics/status information

Substitute values connectable

Yes; Parameterizable

Alarms

• ● Diagnostic alarm

Yes

• ● Hardware interrupt

Yes

Diagnostic messages

• ● Monitoring the supply voltage

Yes

• ● Wire-break

Yes

• ● Short-circuit

Yes

• ● A/B transition error at incremental encoder

Yes

• ● egram error at SSI encoder

Yes

• ● Group error

Yes

Diagnostics indication LED

• ● Monitoring of the supply voltage (PWR-LED)

Yes; green PWR LED

• ● for module diagnostics

Yes; green/red DIAG LED

• ● Status indicator backward counting (green)

Yes

• ● Status indicator forward counting (green)

Yes

Integrated Functions

Number of counters

1

Counting frequency (counter) max.

4 MHz; with quadruple evaluation

Fast mode

Yes

Counting functions

• ● Can be used with TO High_Speed_Counter

Yes; only for pulse and incremental encoders

• ● Continuous counting

Yes

• ● Counter response parameterizable

Yes

• ● Hardware gate via digital input

Yes

• ● Software gate

Yes

• ● Event-controlled stop

Yes

• ● Synchronization via digital input

Yes

• ● Counting range, parameterizable

Yes

Comparator

• — Number of comparators

2

• — Direction dependency

Yes

• — Can be changed from user program

Yes

Position detection

• ● Incremental acquisition

Yes

• ● Absolute acquisition

Yes

• ● Suitable for S7-1500 Motion Control

Yes

Measuring functions

• ● Measuring time, parameterizable

Yes

• ● Dynamic measurement period adjustment

Yes

• ● Number of thresholds, parameterizable

2

Measuring range

• — Frequency measurement, min.

0.04 Hz

• — Frequency measurement, max.

4 MHz

• — Cycle duration measurement, min.

0.25 µs

• — Cycle duration measurement, max.

25 s

Accuracy

• — Frequency measurement

100 ppm; depending on measuring interval and signal evaluation

• — Cycle duration measurement

100 ppm; depending on measuring interval and signal evaluation

• — Velocity measurement

100 ppm; depending on measuring interval and signal evaluation

Potential separation

Potential separation channels

• ● between the channels and backplane bus

Yes

Isolation

Isolation tested with

707 V DC (type test)

Ambient conditions

Ambient temperature during operation

• ● horizontal installation, min.

0 °C

• ● horizontal installation, max.

60 °C; Observe derating

• ● vertical installation, min.

0 °C

• ● vertical installation, max.

50 °C; Observe derating

Dimensions

Width

15 mm

Height

73 mm

Depth

58 mm

Weights

Weight, approx.

45 g