Apacer, in consideration of cost and capacity for customers, introduces the MLC (Multi-Level Cell) offerings with cost structure advantage, SAFD 18P-M. The SAFD 18P-M features a cost-effective MLC (multi-level cell) flash memory and a built-in 7+9 pin SATA connector. It has maximum capacities of 16GB, 32GB, 64GB,128GB and 256GB, with sequential read/write speeds reaching up to 250 and 165 MB/sec, respectively. To work normally in harsh operating environments, Apacer SAFD 18P-M employ the flash vendor guaranteed wide-temp chip, which means it can run stably under industry-level extended-temperature (-40°C ~ 85°C) environments for the highest reliability and longest lifespan. And also, it boasts a built-in S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) technology and inligent power failure recovery function to safeguard data and enhance product stability.
突出顯示
Perfect replacement of 1.8 inch SATA HDDs
Global Wear-leveling and Block Management
Built-in ATA Secure Erase and S.M.A.R.T. Functions
Power Failure Recovery
Trim Command Support
MLC Extended Temperature Support
規格
型號 SAFD 18P-M
接口 SATA 2.0 (3Gb/s)
連接器 (7+9) pin male
外形(英寸) 1.8
NAND閃存類型 MLC
容量 16GB~256GB
持續讀取能力(MB/秒) Up to 250
持續寫入能力(MB/秒) Up to 165
ECC支持 Built-in hardware ECC, enabling up to 16/24 bit correction per 1K bytes
標準工作溫度 0 ~ + 70
擴展工作溫度 ( °C ) -40 ~ + 85*
(*=Supports 32GB~256GB)
存儲溫度 -40 ~ + 100
沖擊 50G
振動 15G
濕度 5%~95%
工作電壓 3.3V & 5V
低功耗 Active mode(Max): 819mA & Idle mode: 194mA
尺寸(mm) 78.3(L)x54(W)x5(H)