Features

• SATA 6Gb/s interface
• iSMART disk health monitoring
• Inligent error recovery system
• Excellent data transfer speed
• Write protection security
• Zero mechanical interference
• Anti-vibration mechanical design
• JEDEC standard MO-300 dimension

Overview

Innodisk mSATA 3ME is designed as the standard Mini PCIe form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the MO-300 specification which established by JEDEC. Regarding of mechanical interference, Innodisk mSATA 3ME absoluy replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk mSATA 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specifications

Availability

Model Name                                               mSATA 3ME

Interface                                                  SATA III 6.0 Gb/s

Type                                                      Standard

Flash Type                                                 MLC

Pin Definition                                               mSATA

Capacity                                                   4GB~128GB

Max. Channels                                              4

Sequential R/W (MB/sec, max.)                               460 / 160

Max. Power Consumption                                    1.3 W (3.3V x 390 mA )

Thermal Sensor                                             ST- Optional

External DRAM Buffer                                        N

H/W Write Protect                                           Optional

ATA Security                                                Y

Conformal Coating                                           Optional

S.M.A.R.T.                                                  Y