Features

• SATA 6Gb/s interface
• iSMART disk health monitoring
• Inligent error recovery system
• Excellent data transfer speed
• Write protection security
• Zero mechanical interference
• Anti-vibration mechanical design

Overview

Innodisk M.2 (S42) 3ME is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3ME absoluy replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S42) 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specifications

Availability

Model Name                                                  M.2 (S42) 3ME

Interface                                                     SATA III 6.0 Gb/s

Type                                                         Standard

Flash Type                                                    MLC

Capacity                                                      4GB~64GB

Max. Channels                                                 4

Sequential R/W (MB/sec, max.)                                  360 / 65

Max. Power Consumption                                       0.49 W (3.3V x 150 mA )

Thermal Sensor                                                ST- Optional / WT- Default

External DRAM Buffer                                           N

H/W Write Protect                                              Y

ATA Security                                                   Y

S.M.A.R.T.                                                     Y

Dimension (

Features

• SATA 6Gb/s interface
• iSMART disk health monitoring
• Inligent error recovery system
• Excellent data transfer speed
• Write protection security
• Zero mechanical interference
• Anti-vibration mechanical design

Overview

Innodisk M.2 (S42) 3ME is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3ME absoluy replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.

Innodisk M.2 (S42) 3ME effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.

Specifications

Availability

Model Name                                                  M.2 (S42) 3ME

Interface                                                     SATA III 6.0 Gb/s

Type                                                         Standard

Flash Type                                                    MLC

Capacity                                                      4GB~64GB

Max. Channels                                                 4

Sequential R/W (MB/sec, max.)                                  360 / 65

Max. Power Consumption                                       0.49 W (3.3V x 150 mA )

Thermal Sensor                                                ST- Optional / WT- Default

External DRAM Buffer                                           N

H/W Write Protect                                              Y

ATA Security                                                   Y

S.M.A.R.T.                                                     Y

Dimension (LxH/mm)                                         22.0 x 42.0 x 4.5

Vibration                                                       20G@7~2000Hz

Shock                                                          1500G@0.5ms

MTBF                                                        >3 million hours

Storage Temperature                                          -55°C ~ +95°C

Operation Temperature                                        Standard Grade: 0°C ~ +70°C;

LxH/mm)                                         22.0 x 42.0 x 4.5

Vibration                                                       20G@7~2000Hz

Shock                                                          1500G@0.5ms

MTBF                                                        >3 million hours

Storage Temperature                                          -55°C ~ +95°C

Operation Temperature                                        Standard Grade: 0°C ~ +70°C;